ยังมีอยู่ ESP32 WEMOS LOLIN32 LITE V1.0.0 WIFI BLUETOOTH BOARD REV1 4MB FLASHinventor.th

รายละเอียดของสินค้า ESP32 WEMOS LOLIN32 LITE V1.0.0 WIFI BLUETOOTH BOARD REV1 4MB FLASHinventor.th

Wemos proposes a new version Lite of the LoLin32 based on a module ESP-WROOM-32 corrected. This new module identified ESP32-DOWD6Q 28017 (Rev 1) brings some bug fixes from Espressif SoC. This SoC is always equipped with 4MB of flash memory and brings 801.11 b/g/n WiFi connectivity and Bluetooth LE for your DIY projects based on microcontrollers.
To become Lite, the LoLin32 has to lose a few pins. The RX / TX and 5V pins are no longer present on the board. There is only one GND pin (instead of 5) and only one 3V3 pin (instead of 2). All I / O pins are available (x21 in total) which will allow you to exploit all the possibilities offered by the ESP32. The JST connector used to power the LoLin32 Lite using a LiPo battery is always present. It is now oriented in the extension of the card to the left of the micro-USB connector. The micro-USB port is always present. It is used for programming (code Arduino, Lua or micro-python) as well as for the charge of the battery. The LoLin32 Lite status LED is always present. The Reset button has moved between the two micro-USB and LiPo battery connectors.
Features of the LoLin32 Lite
- SoC: Espressive ESP32-DOWD6Q Rev 1.0. Tensilica Xtensa LX6 dual core processor
- WiFi 802.11 b / g / n
- Bluetooth LE
- Default firmware: Lastest MicroPython firmware
- Max serial baud rate: 256000bps
- Connector 213-pin for UART, I2C, SPI, VP / VN, DAC
- All pins operate with 3.3V
- 1x micro USB port for power, LiPo battery charging, programming and debug
- USB / serial converter: CH340G (drivers for macOS and Windows on WiKi)
- 1x Reset Button
- Power: 5V via the micro USB connector or LiPo battery (max. Charging current: 500mA)
- Dimensions and weight: not indicated (approx 40 x 25mm)
Paket :
1. ESP32 WEMOS LOLIN32 LITE V1.0.0 WIFI BLUETOOTH BOARD REV1 4MB FLASH
2. Pin Header Set